HyperMount (Gen 3)
Stick it where your phone actually needs to be. HyperMount (Gen 3) snaps your phone into the perfect angle with reusable VacuLock™ grip and an upgraded N52 magnetic head.
US Orders Ship in 12 Hours
Featured add-ons
- NanoSuction VacuLock™ Base: Proprietary reusable adhesive technology grips smooth and very lightly textured hard surfaces like flat dashboards, mirrors, and tile with engineered holding force.
- Upgraded N52 Magnetic Head: Thicker magnet array so that your phone snaps on fast and stays locked in for maps, calls, recipes, workouts, filming, and hands-free flow.
- 360º Angle Control: Dual hinges and a 360º center pivot let you rotate, tilt, and dial in the exact view. Portrait. Landscape. Driver view. Creator view.
- Built Beyond the Car: Use it on your dashboard for maps, your mirror for calls, your kitchen for recipes, your desk for work, and tile for workouts.
- Rinse to Refresh: Dust happens. Rinse the VacuLock™ base, let it dry, and press it back down to bring the grip back.
- MagSafe Ready. Rings Included. Snaps directly to MagSafe-compatible iPhones and cases. Includes metal ring adapters for Android phones, older iPhones, and non-MagSafe cases.
Product SKU(s):
statikco.com から購入したすべての商品は、特に明記されていない限り 24 時間以内に発送されます。
受領後 60 日以内であれば、損傷のない商品を返品できます。返品を開始し、返品ポリシーの詳細を確認するには、 ここをクリックしてください。
HyperMount (Gen 3)
Released version 3.0
Product
Justin Shook
Release date: 2026-07-21
HyperMount (Gen 3)
Released version 2.1
Product
Justin Shook
Release date: 2026-07-03
HyperMount (Gen 3)
Released version 2.0
Product
Justin Shook
Release date: 2025-12-01
statikco.com で購入したすべての新製品には 1 年間の保証が付いています。
購入後 1 年以内に通常の磨耗により製品が破損した場合は、交換させていただきます。詳細については、ここをクリックしてください。
Beyond the car
For the Places You Actually Use Your Phone
Use it on your dashboard for maps. Stick it to a mirror for calls. Put it on tile for workouts. Set it up in the kitchen for recipes. Drop it on your desk when you need your phone visible but out of your hands. It keeps your phone up, locked in, and right where the moment needs it.
Pure Physics
The Grip Is the Point
VacuLock™ gives HyperMount (Gen 3) its superpower. It grips smooth surfaces and lightly textured dashboards where normal suction cups can struggle, then pulls off cleanly with the release tab. No bulky vent clamp. No permanent adhesive plate. Press. Snap. Go.
One hand
Magnetic Snap
Without the Clamp
The upgraded N52 magnetic head gives your phone a fast, confident snap. No cradle. No arms. No two-hand wrestling match. Just snap your phone on and get back to what you were doing. MagSafe-compatible iPhones connect directly. Android phones, older iPhones, and non-MagSafe cases work with the included metal ring adapters.
Full range
Find the Angle Fast
Maps need one angle. Recipes need another. Filming needs the exact shot. HyperMount (Gen 3) gives you dual 180º hinge adjustment plus a 360º center pivot, so you can rotate, tilt, and lock in the view without rebuilding your setup. Portrait. Landscape. Driver view. Creator view. Done.
Best in class features
Stick It Where the Shot Is.
Your phone is part of almost everything you do. Driving. Cooking. Working. Training. Filming. Calling. Map directions. Following a recipe. Catching the shot before the moment disappears. Most mounts are built for only one thing. HyperMount (Gen 3) is built for all the moments in between. The reusable VacuLock™ adhesive base grips smooth, hard surfaces and lightly textured dashboards, then removes with the pull tab when you need to move it. The upgraded N52 magnetic head snaps your phone into place fast. Dual 180º hinges and 360º pivot let you dial in the exact angle.
- Compatible surfaces
- Works on hard, smooth or lightly textured surfaces. Like glass, sealed wood, and most dashboards.
- Holding force
- 88 lbs (VacuLock™ vacuum seal)
- Magnetic head
- 2mm N52 magnet array, 1.5x stronger snap-on hold than Gen 2
- Adjustability
- Dual 180° hinges, 360° center pivot
- Phone compatibility
- MagSafe iPhones (iPhone 12 and newer), and any phone using the included metal ring adapters
- What's included
- HyperMount Gen 3, 2× metal ring adapters, instruction manual
Customers also bought
Frequently Asked Questions (FAQ)
Gen 3 brings the HyperMount Pro base to the regular HyperMount — including the suction release tab for easy removal, thicker N52 magnets for a stronger hold, and redesigned magnetic rings for Android users. Same surface compatibility, upgraded everywhere it matters.
No. HyperMount Gen 3 is a mount only. If you want a mount with integrated 15W wireless charging, see HyperMount Pro. Category: Charging
Yes, two magnetic ring adapters are included in the box. Stick a ring to the back of your phone or case, and your phone snaps onto the mount just like a MagSafe iPhone. The Gen 3 rings have been redesigned based on Gen 2 customer feedback to be easier to apply correctly.
If using the pull-tab on the suction cup will not release the suction, try prying up on the edge of the suction cup up with your fingers. Once the suction is released, you will be able to remove the HyperMount from the surface.
No, the base just needs to be cleaned. Rinse it with warm water, let it air dry, and the suction strength returns to nearly full.
Yes, it's designed for car dashboards and works on textured plastic surfaces where most suction mounts fail. Clean the dashboard first for the best seal, and avoid surfaces that get extremely hot from direct sun (over 180°F sustained) for the longest life.
Clean the back of your phone or case with the included alcohol wipe, peel the adhesive backing off the ring, center it on the back of your phone, and press firmly for 30 seconds. Wait 24 hours before maximum-weight use for the adhesive to fully cure.
