Step 1
Meet SmartCard
Get to know your SmartCard.
- Status LED — used for battery and pairing status.
- Pairing Button — used to pair SmartCard.
Step 2
Charge Up
SmartCard does not come with a fully charged battery. To fill up, place it on any wireless charger — the bolt should be centered and facing up. You’ll feel a slight magnetic pull, and the LED will light up when charging is active.
- Charging
- Full charge
Step 3
Prepare Your Device
SmartCard works with Apple’s Find My and Google Find Hub. Use the selector below to choose your platform for setup.
NOTE: Tracking only works with one platform at a time.
Platform
Ensure you have the Google Find Hub app installed on your device.
-
Go to the Play Store and search “Find Hub”.
-
Install it if it is not already there.
How to Pair to Android
- Ensure you have the Find Hub app installed and SmartCard is powered on.
- Navigate to your device’s home screen, and position SmartCard next to the device.
- A pop-up will appear asking if you’d like to pair SmartCard. Tap Connect, Agree and Continue, and give it a name.
- Your SmartCard is ready to go!
Troubleshooting
If SmartCard does not appear on your phone, follow these steps in order:
- Press the Pairing Button once to wake the card. You’ll hear one beep and see one flash on the Status LED.
- Navigate to your device settings, search for Devices, then tap Devices — Google Play Services.
- Turn on Scan for nearby devices. SmartCard should appear under Available devices nearby. Tap it and continue with step 3 from above.
How to Pair to iPhone
The Apple Find My walkthrough is not in this guide yet. Until it lands, the full product manual below covers pairing SmartCard to an iPhone step by step.
Everything before this point — the card tour, charging and the app check — is the same on both platforms.
Tips & More Info
Proper Placement: Slide SmartCard into an outside pocket of your wallet or bag. Metal wallets, RFID sleeves and dense material can interfere with tracking capabilities.
Once connected, SmartCard’s location updates whenever any device on the network passes near your card. Don’t worry if it sits still for a while, that’s completely normal.
Frequently Asked Questions
Does it work with my phone?
Yes. SmartCard pairs with any recent iPhone through Apple’s Find My, and with Android phones through Google Find Hub. You only need one of the two — pick your platform in step 3 above.
How long does the battery last?
Months of normal use on a charge. When it runs low, place SmartCard on any wireless charger with the bolt centered and facing up, and the status LED will confirm it is charging.
Where should I keep it?
In an outside pocket of your wallet or bag. Metal wallets, RFID sleeves and dense material sit between the card and your phone and can interfere with tracking.
Why has the location not updated?
SmartCard updates its location whenever any device on the network passes near it. If it is somewhere quiet, it can sit unchanged for a while — that is normal, not a fault.
It is not showing up when I try to pair. What now?
Press the pairing button once to wake the card: you should hear one beep and see one flash on the status LED. The Troubleshooting card above walks through the rest in order.
Full Product Manual
More questions? Check out the full product manual below.
Enjoy Your
SmartCard
Need help? Email us at support@statik.com
